Diamond Turbo Grinding Cup Wheel

1. The diamond Turbo Grinding Cup Wheel with high diamond concentration provides for a faster cut rate while the high quality of the diamonds provides longer blade life.

2. Segmented Turbo Rim grinding wheel for aggressive and fast removal.

3. Grinding segments with heat treated steel bodies which provide increases durability and wheel life.

4. Venting holes for fast Grinding, dry or wet grinding both available.

5. Suitable for use on grinding on marble, tile, concrete, and rock.

6. Applicable machine: grinding machines, angle grinders.

The Most suitable for aggressive stock removal and shaping of concrete or stone surfaces before smoothing these out with resins.

With their segments sintered closely together, The most important is turbo cups don't leave horseshoe marks.

5" TURBO CUP WHEEL

7" TURBO CUP WHEEL

Customized size please consult Diaflex for feasibility.

A diamond turbo grinding cup wheel mounts on an angle grinder to grind concrete, stone, and masonry. What sets it apart is the turbo segment design – the segments have a wave-like profile. When spinning, debris is expelled through the grooves instead of packing up. Paired with vented core design, it stays cool during extended grinding sessions.

A turbo cup wheel does three things:

Floor leveling – Grind down bumps, laitance, and uneven spots on concrete floors

Coating removal – Strip old epoxy, paint, adhesives, and thin-set mortar

Stone shaping – Edge grinding and shaping on granite, marble countertops

Compared to standard cup wheels, turbo segments are set at an angle. This angled design creates more continuous contact – less bouncing, smoother finish.

Compatible equipment: Angle grinders (100mm/115mm/125mm/180mm). Threaded arbor: M14 and 5/8"-11. Works dry or wet. As a source factory, we support full customization: diameter, grit, segment count, arbor size.

Standard cup wheels come in single-row and double-row. Single-row is fastest but leaves marks. Double-row is smoother than single-row and lasts longer. Turbo is the third option – segments set at an angle, more surface contact, speed is still fast, but the finish is smoother than double-row.

In one sentence:

Fastest → single-row

Long life, decent finish → double-row

Fast + smooth + no marks → turbo

Turbo also has a self-cleaning effect – slurry and debris are expelled from between segments continuously during grinding, preventing loading. Cleaner surface, more consistent grinding efficiency.

Materials: Concrete (new/old), cement mortar, brick walls, blocks, granite, marble, engineered stone, ceramic tile.

Works dry and wet. For dry grinding, the turbo gaps plus vented core allow air circulation to dissipate heat. Wet grinding with water cools faster, suppresses dust, and extends life.

Dry or wet?

Indoor, dust-sensitive → wet

Outdoor, no water, small patches → dry

Large-area continuous work → wet (longer life)

Segment count directly affects grinding speed and life.

12 segments: Fewer segments, deeper cut per segment – faster and more aggressive. Best for hard concrete, heavy removal, fast leveling.

24 segments: More segments, lighter load per segment – slower wear, longer life. But shallower cut per pass, slightly slower than 12-segment.

Which one?

Hard floors, tight deadlines, large-area coarse grinding → 12 segments

Soft floors, fine grinding, fewer wheel changes → 24 segments

Buying advice: If your customer has both use cases, split the order. 12-segment for rough opening, 24-segment for final finishing.

Hot Tags: diamond turbo grinding cup wheel, China diamond turbo grinding cup wheel manufacturers, suppliers, factory, diamond abrasive wheel, diamond abrasive cutter, diamond cutting replacement, diamond grinding tool, diamond grinding cutter, diamond grinding job